Just to give you an idea, 11 hours OCCT Linpack with AVX instructions stable, with a 1700 3.9ghz and ram at 3200mhz, wasnt possible before that microcode update. However, after fighting for ages with my ram, loading XMP profile and then manually setting other ram settings, my board was doing the same, few post fails and then reboot straight back to 2133mhz, the cure was, just setting XMP profile 1, leave other ram settings on auto, voltage, timings and speed on auto, it worked, I also had to add a tiny bit more Dynamic SoC voltage its called in my bios, it maybe called CPU NB voltage or something similar in yours, bringing it upto 1.125v in total, stock is 0.900v, nothing higher than 1.2v in total. So it should be up too date, unless they released another update in the past 8 days.Ġ606 is the main one you want, updates CPU microcode, and thats the one to fix memory. I had a game getting mine to run at full speed on a Gigabyte mobo, but shot straight to full speed on an MSI mobo, 1st of all is your bios upto date, memory problems are being fixed with bios updates right now ? I was able to get my Ryfrom 3Ghz to 3.65. JUMP MORHER BROOOO Plz like and sub also sub to my main channel Adam and Logan Productions I stream on twitch Manadam101my website. Press F2 to load default values and continue.
I've tried to set it at 2400mhz, and 2666mhz but everytime I exit and save, my computer turns off, and on for like 3 times, and on the fourth time, a screen pops up and tells me my System info and that "overclocking Failed". The previous overclock settings have failed, system has been restored to it's default settings. But in my bios, it shows that it is at 2133mhz. So I've been trying to set my memory speed on my ram to 2666mhz since that was the speed it was advertised at.
0 kommentar(er)
